Company News Industry News Maintenance Knowledge
Current position:HOME > News > Industry News

Introduction to the method of adding electric forklift electrolyte

editor:admin │ Release time:2018-06-28 

First,The electric forklift electrolyte can be 10 to 15 mm high above the electrode plate. There are two red wire batteries, and the electrolyte should not exceed the upper red line. In case the electrolyte is too full, it will overflow from the small hole in the battery cover. The electrolyte is electrically conductive, and once it flows between the positive and negative electrodes of the battery, a self-discharge of the circuit is formed. In this case, the electrolyte should be wiped off or rinsed with boiling water. 

Second,If something is accidentally dropped into the electric forklift, do not use metal objects to fish, use wooden sticks to remove impurities; if you use iron wire or copper wire to fish, metal molecules will enter the battery under the corrosion of sulfuric acid. Self-discharge is formed and the battery is damaged.

Third,During the charging and discharging process of the battery, the water in the electrolyte is gradually reduced due to electrolysis and evaporation, resulting in a decrease in the electrolyte surface. If it is not replenished in time, it is possible to shorten the service life of the battery. The distilled water should be replenished in time, and it should not be replaced with pure drinking water. Because pure water contains a variety of trace elements, it will have an adverse effect on the battery. 

Final,In addition to adding electrolyte to the electric forklift battery, there are many places to pay attention to, and the more important place is the usual maintenance. By spending a little more time each day, you can extend the life of your electric forklift battery.


点击这里给我发消息 点击这里给我发消息